Home > News > Content

How to Avoie Noise From Four-drive Piling Machines

- Mar 19, 2018 -

Four-drive piling machine in the construction of the noise can not be avoided, but it is a slight normal mechanical noise, but if the piling machine in the piling process, there is a lot of noise, it will cause attention, so that the piling machine and vibration equipment caused a lot of damage.

There are several ways to avoid excessive noise caused by the four-drive piling machine.


1. Check the piling machine anchor bolts are fastened, the periodic check appears loose to tighten up in time to prevent the construction process because the bolts loose produced too much noise;


2. Check the protective cover of the four driving pile, and look around the phenomenon of no collision shield;


3. Check the bearing to avoid the noise caused by the lack of oil or damage, timely oil injection, timely replacement of damaged bearings.


Any construction site is very noisy, four-drive piling machine is only a small part, in fact, the operator of the machine as long as the correct operation methods and skills, will be the noise control within a reasonable range.


Related News

Related Products

  • Hydraulic Portable DTH Quarry Drilling Rigs
  • Small Crawler Hard Rock Drilling Rig
  • Portable Water Borehole Drilling Machine
  • Geothermal Borehole Drilling Equipment
  • Deep Hole Hammer Water Drilling Machine for Drinking Water
  • Solar Ramming Piling Machine for Solar Pile Driving